My Cart: 0 item(s)

Product Search

Secure Checkout
&mvte:page:name;

Find Products That Fit Your Truck

Reset Go
Single Wheel Conversion
    Single Wheel Conversion
    Purchase Single Wheel Conversion
    • Single Wheel Conversion SKU: F085W

    • No reviews yet. Write a review!
    • $0.00 $0.00

      Overview

      The Buckstop Single Wheel Conversion is an engineered kit with each component integrated to acheive as close to OEM structure as possible while converting from dual rear wheels to four single tires. The purpose of the Conversion is for greater off-road traction and performance without compromising weight carrying capacity. At the core of the kit are 41" tires with 6700 pound capacity each. Clearance for the big tires is achieved with a small suspension lift and large cut-out fender flares to keep the center of gravity as low as possible. The wheels are reversible and interchangeable front to rear for proper tire rotation. Track width is roughly 92" at the outside and consistent front to rear. Fender Flares are an itegral part of the kit providing complete tire coverage from road spray and also replacing and covering parts of the body that are cut away for tire clearance.

      Features

      Load Testing
      41” tires and 10,000lb payload are the fundamental elements of the Single Wheel Conversion.  At Buckstop, the chassis is fully loaded with 10,000 lbs and subjected to extreme articulation and turning conditions to determine suspension and body modifications required for tire clearance.






      Suspension
      Key components of the Buckstop Suspension Kit are replacement Radius Arms, Coils Springs, and Heavy-duty Track Bar Mount.  These pieces maintain proper, original steering geometry.  Performance is enhanced with Buckstop’s Heavy Duty track bar mount fabricated from 3/8” steel. INCLUDED WITH BASE KIT.





      Fender Flares and Body Modification Kit
      In order to neatly fit the monster 41” tires under the body, the internal frame, fender, and body require cutting and trimming.  Buckstop’s uniquely designed 8” wide fender flares are a special part of the puzzle that cover the cut-out portions of the body and also completely cover the tire from road spray. The flare is a one-piece design including a return inner wheel liner that integrates with the OE liner. Fender Flares are shipped in un-finished fiberglass. Final coating/paint is required. Behind the headlight, a major piece of the inner frame structure must be removed for tire clearance.  Buckstop provides a replacement structure that bolts into place allowing room for the tire – no welding required. INCLUDED WITH BASE KIT.  





      Wheels and Tires
      Tires: With a 19,500lb GVW, rear axle capacities approach 14,000lbs requiring a tire capacity up to 7,000lbs each.  The 335/80R20 is the perfect choice - a “military” style radial tire with excellent handling characteristics under load.  It has an off-road tread pattern and can be aired down to match different loads.  Tire noise is acceptable at a level equivalent to a standard truck mud tire.  

      Wheels: The military tire has a higher shoulder than light-truck street tire. A typical street, light-truck wheel will not fit the tire properly and carry the weight. Buckstop manufactures wheels that are designed for the load and the military tire. They track in-line front to rear compensating for the difference in front and rear axle widths of dually trucks.  The wheel is single piece construction without extra bolt flanges, spacers, and bolts.  Weight capacity is acheived through a heavy-duty rim made from ¼” thick material. Tires can easily be rotated front to rear for even wear without dismounting the tire from the rim. 5 WHEELS AND TIRES ARE INCLUDED WITH BASE KIT.

      Bumper
      Topping off the truck is an extra-wide bumper compensating the increase in front track width.  The bumper extends past the fender flares to fend off fence posts, trees, and other obstacles jumping out along the way.  At the heart of the bumper are the same features found on standard Buckstop bumpers including winch mount, tow hooks or mount points, trailer receiver, latching winch access door, built-in light mounts, and several options for built-in sirens, speakers, and monitor. INCLUDED WITH BASE KIT.




      Running Board Steps

      The truck ends up 7-1/2” higher than stock considering suspension lift and larger tire diameter.  This makes accessing the cab a challenge!  Buckstop has designed a custom set of Running Board Steps for Conversion trucks that bring the rig back down to earth.  The steps are both broader and lower than standard steps.  After climbing in and out of the truck a few dozen times, drivers will appreciate the extra boost they get from lower steps.  Steps are NFPA compliant using “Fire Tread Plate.”



      Underside Protection

      Undercarriage protection is available with Radiator, Transfer Case, and Transmission Skid Pans designed to keep branches and debris from damaging the underside of the vehicle.  These pieces are heavy-duty construction and fit tightly to the underside with minimal loss of ground clearance.  These pieces are not included with the base kit.



      Production Time: 8 Weeks
    • Included Features:

      • 335/80R20 Radial Tires - 6700lb capacity each
      • 11" x 20" Heavy-duty Reversible Wheels
      • 3-1/2" Suspension lift including replacement Coils and Radius Arms
      • Cut-out Fender Flares and Body Modification Kit
      • Extra Wide Bumper

    • Options

    •  
    • Included Features:

      • 335/80R20 Radial Tires - 6700lb capacity each
      • 11" x 20" Heavy-duty Reversible Wheels
      • 3-1/2" Suspension lift including replacement Coils and Radius Arms
      • Cut-out Fender Flares and Body Modification Kit
      • Extra Wide Bumper

    • Get A Quote

    Lighting is a critical part of your bumper. There are considerations of snow and fog conditions, high speed driving, city vs. off-road, search and exploration, light source – halogen, HID, LED, and budget. Trailready offers a variety of solutions for all lighting needs. The STANDARD configuration is one pair of built-in 6" round lights. The information below shows additional light-mount options available on most Trailready bumpers.

    Standard Lighting

    Standard Lighting

    EVERY BUMPER COMES READY FOR A PAIR OF 6" ROUND LIGHTS

    Note: The bumper comes with universal mounts for single post bottom mount lights. Factory lights will NOT mount directly into the bumper. In most cases the factory wiring harness and dashboard switch can be used to run aftermarket lights.

    BUILT-IN RECESSED LIGHT BUCKETS

    ADDITIONAL LIGHTING - $125

    BUILT-IN RECESSED LIGHT BUCKETS – Add one more pair of 6" or 4" lights

    DUAL RIGID LED LIGHTS

    DUAL RIGID LED LIGHTS - $125

    Recessed Mounting for two pair of Rigid "E" Series 4" Light Bars. Requires "U" Cradle Mount. No charge!

    GRILL GUARD MOUNTING

    GRILL GUARD MOUNTING - $125

    Cross bar for Baja Style Grill Guards – Add 2, 3 or 4 lights.

    BOLT ON LIGHT BAR

    BOLT ON LIGHT BAR - $110

    Attaches to top of bumper. Add 2, 3 or 4 lights.

    TOP MOUNTING - No Charge

    TOP MOUNTING - No Charge

    Drill your own holes to mount your own lights. Note: Drilling and mounting performed by customer

    NO LIGHTS - No Charge

    NO LIGHTS - No Charge

    Eliminate light openings entirely to have a solid wing face.

    WINCH SELECTION – Trailready bumpers are built for most 4-1/2″ x 10″ bolt pattern winches. There is ample access to the winch controls and cable through the 28″” access opening on top of the bumper. Winches can be mounted foot down or foot forward. Trailready offers a selection of WARN winches matched to an assortment of needs encountered by our customers. When selecting a winch, consider how often you will use it and the demands of the situation (long pulls, difficult terrain, etc). Two “”sport”” winches are offered including the popular air-compressor winch combo and the light-weight Zeon series.

    These winches will NOT work: Warn VR EVO, Ramsey RE Series worm drive, Superwinch, and all Megawinch.

    Powder Coat colors include full sandblast, phosphate wash, two-coat – primer and top coat – baked on industrial powder coating. STANDARD COLORS: STEEL GREY and BLACK – Standard.

    BLACK – Hammertone (Standard choice)

    Large texture, slippery finish, easy to clean. Mini-tex – fine texture, matte finish

    STEEL GREY – Standard

    SPECIALTY COLORS +$125

    CUSTOM METALLIC COLORS include primer, color, AND clear coat +$190 to $250

    Reviews

    There are no reviews yet so why don't you use the form here and be the first to submit a review?

    Review Single Wheel Conversion

    Rate and Review Single Wheel Conversion

    Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.